HAKRC HK3260 BL_32 2-6S 60A 4-In-1 ESC

Description

HAKRC HK3260 BL_32 2-6s 60A 4-In-1 ESC

High quality hardware

STM32F051 main control chip, operating frequency up to 48MHz. Imported mosfet from abroad, three-in-one IC driver, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pads are all metallized and edged, so that you can avoid the pads from falling off when using; 3 ounces of copper thickness, 6-layer board, greatly reduce heat generation, higher efficiency.

Highly integrated and compact

It integrates 4 high-performance 60A ESCs, built-in galvanometers, and purchases new and advanced SMT. After such a high level of integration, the volume is only about the same size as the flight controller of the traverse aircraft, and the installation and wiring will become very simple. Such an incredible size and volume, tailored for a race-grade traverser.

Native support for BLHeli-32

Using the BLHeli-32 firmware, it has powerful performance and rich functions; and supports multiple ways to set ESC parameters, or upgrade the ESC firmware (such as through the throttle signal line, use other development boards, or use cleanflight or betaflight firmware to power the flight controller to set or upgrade).
Hardware PWM, Damped Light
The hardware PWM drives the motor, with less noise and smoother throttle response. Damped Light technology, regenerative braking function, makes the motor deceleration more sensitive and effective, and the control is more accurate; active freewheeling technology allows the battery to recover power and prolong the battery life;

DShot150/300/600/1200 Ready

Not only supports ordinary PWM throttle signal mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest DShot150/300/600/1200 digital throttle, with strong anti-interference ability and fast response. The input and output lines use soft silicone wire, which is very durable and high temperature resistance, which is convenient for welding.

Parameter:
Working voltage 2-6S
Maximum continuous working current 60A
Maximum instantaneous working current 70A
Support communication mode DShot150/300/600/1200 PWM Oneshot125, Oneshot42 and Multshot
Assistant software BLHeli 32
Firmware version BL32.7
Installation hole distance 30.5*30.5mm
Product size 45*42.5*6mm
Packaging size Φ62*33mm
Product net weight 14.5g
Packing weight 40g

Diameter